Words of Advice: Planning a New Design


Reading time ( words)

In a recent survey, we asked the following question: What do you think is the most important thing a designer should remember when planning a new PCB design? Here are a few of the answers, edited slightly for clarity.

  1. I don’t have a “single” thing that is the most important, but stackup, constraints, and EMI come to mind.
  2. At an early stage, involve the PCB fabricator, assembly production engineers, and test engineers to get their feedback on the design.
  3. Placement is key to making a design successful.
  4. Look at the complete picture and not just your own “small garden.”
  5. A prototype needs space for hand-soldering.

Share

Print


Suggested Items

Just Ask Joe: Standardized Grid Designs

08/26/2020 | I-Connect007 Research Team
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

Book Excerpt: Thermal Management With Insulated Metal Substrates, Part 2

06/16/2020 | I-Connect007 Editorial Team
The following is an excerpt from the second half of Chapter 1 of "The Printed Circuit Designer's Guide to... Thermal Management With Insulated Metal Substrates," written by Ventec International Group’s Didier Mauve and Ian Mayoh. In this free eBook, the authors provide PCB designers with the essential information required to understand the thermal, electrical, and mechanical characteristics of insulated metal substrate laminates.

Counseling Startups From Design Through NPI

04/30/2020 | Andy Shaughnessy and Happy Holden
Andy Shaughnessy and Happy Holden sat down for an interview with Richard Marshall, CEO of Xitex Limited, a company based in the U.K. that provides consultancy to startups launching wired and wirelessly connected products. Richard explains some of the most common factors companies overlook when introducing a new product. He also discusses one startup’s new product—a Fitbit-type device worn by horses—and why he advises startups to “Make your mistakes close to home.”



Copyright © 2020 I-Connect007. All rights reserved.