AIM Expands Manufacturing Facility in Europe


Reading time ( words)

AIM Solder has announced the expansion of the full-line manufacturing facility in Łódź, Poland. AIM’s European facility offers locally-made solder paste, bar solder, cored and solid wire, liquid flux, cleaners, adhesives and underfills. The fully-staffed facility also provides sales support and customer service alongside AIM’s unparalleled technical support.

The expansion, which nearly doubled the size of the facility that was initially opened in 2015, enables the company to support the growing demand for its products in Europe.

David Suraski, Executive Vice President and Jerzy Liz, Operations Manager jointly cut the ribbon before leading a tour of the state-of-the-art facility.

“We are very pleased about the expansion of our facility in Europe,” said David Suraski, Executive Vice President of the Assembly Division of AIM Solder. “This investment in Europe, in addition to recent expansions in Mexico, United States and Asia, are further proof of AIM’s dedication to continually expanding its global footprint.”

About AIM 

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.