Horizon Sales Strengthens Presence in Florida


Reading time ( words)

Horizon Sales, the Midwest’s most trusted source for electronics assembly and soldering equipment and supplies, is pleased to announce that it has hired Miguel A. Martinez as regional sales manager for the state of Florida.

Based out of Kissimmee, Florida, Martinez is a certified IPC instructor for IPC 610 Acceptability of Electronics Assemblies and IPC 7711/7721 Rework, Repair and Modification. He brings prior experience as a manager of a repair department with close to 50 employees consisting of 30 electronics technicians, 10 solder techs and 10 assistant techs.

Martinez also worked as a Sr. Electrical Technician, building control panels and troubleshooting for theme parks. He holds an Electrical Engineering and Electronics Engineering degree from the University of Turabo located in Gurabo, Puerto Rico.

In business for more than 25 years, Horizon supplies state-of-the-art equipment and supplies to its customers, helping them to achieve best-in-class status in their respective markets. Horizon Sales represents the mid-western states of Michigan, Ohio, Indiana, Kentucky, Western Pennsylvania, Illinois, Eastern Iowa, Wisconsin and Florida.

About Horizon Sales

Horizon is a manufacturers’ representative corporation and distribution group offering machinery and supplies to the electronics industry. Horizon manages and sells to the following states:  Michigan, Ohio, Indiana, Kentucky and Western Pennsylvania, Illinois, Eastern Iowa and Wisconsin. For more information, visit www.horizonsales.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.