AIM Wins IATF Certification for Poland, Canada and Mexico Facilities


Reading time ( words)

AIM has successfully earned IATF 16949:2016 certifications for its facilities in Poland, Canada and Mexico. IATF certification projects are underway at all AIM facilities to align with the company’s global footprint. 

The IATF 16949 standard is held in high regard throughout the automotive industry worldwide. AIM’s certification reflects its commitment to this industry as well as its overall dedication to continuous improvement in areas such as quality, efficiency, cost-effectiveness.  

“This certification is a prodigious milestone for AIM,” said AIM’s Executive Vice President, David Suraski. “The certification process is rigorous and represents a tremendous amount of effort on behalf of the entire AIM Solder team. Earning the IATF 16949 certification solidifies AIM’s position as a global leader in solder assembly solutions for the automotive industry and beyond.”

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)

07/16/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.

Failures and Reliability in Soldering

07/09/2019 | Michael Gouldsmith and Zen Lee, Thermaltronics
The definition of failure is "the lack of success in doing or achieving something, especially in relation to a particular activity." If the activity is concerning a soldering process, such a failure can have a downstream impact far beyond the actual solder joint. In this regard, it is first necessary to understand what constitutes a good solder joint because appearance is too often deemed a success.



Copyright © 2019 I-Connect007. All rights reserved.