ZESTRON to Exhibit at SEMICON West


Reading time ( words)

ZESTRON will be featuring the VIGON PE 190A alkaline defluxing agent at SEMICON West 2019.

Based on ZESTRON's patented MPC technology (micro phase cleaning), VIGON PE 190A is a water-based, alkaline cleaning agent specifically developed to remove flux residues from PCBs as well as power electronics including leadframes, discrete devices, power modules, and power LEDs.

For more information on the company's complete line of semiconductor and PCB defluxing agents and other cleaning process solutions, visit Booth #5672 during SEMICON West.

About ZESTRON

ZESTRON is headquartered in Manassas, Virginia and operates in more than 35 countries. With eight technical centers worldwide and the industry’s most knowledgeable team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information or to tour one of our technical centers, please visit www.zestron.com.

Share

Print


Suggested Items

Cavity Board SMT Assembly Challenges (Part 2)

07/03/2019 | Dudi Amir and Brett Grossman, Intel Corporation
This article describes the details of a study of assembling SiP BGA packages into a cavity. It points out the challenges involved in the board cavity design and assembly of components in a cavity. The authors discussed the board design challenge of having a cavity and defining the proper depth of the cavity to accommodate the board fabricator, the product design, and the SMT assembly.

Clean vs. No-clean Solder Process

07/03/2019 | Russell Poppe, JJS Manufacturing
Although IPC suggests clear guidelines, agreeing on the cleanliness (or otherwise) of a PCB assembly can often be a subjective and even contentious subject within the electronics manufacturing industry. If you’ve chosen to outsource your assemblies, how do you decide what to specify to your EMS partner? Find out here.

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.



Copyright © 2019 I-Connect007. All rights reserved.