Fuji America Expands its Western Rep Network


Reading time ( words)

Fuji America Corporation, the world’s leading supplier of surface mount technology pick & place and smart factory software solutions, announces its newest sales representative in the Western Region, Alphatek, Inc.

Customers in the Rocky Mountain region (including Colorado and Utah) will have access to Fuji’s placement technologies, Nexim enterprise software and automation tools with experienced local representation. 

Alphatek, Inc. has been in business for over 25 years and is committed to providing customers with superior products, technical expertise and after-sales support. The company has extensive knowledge of circuit board and microelectronics assembly, and serves many markets including: aerospace, telecommunications and medical devices.

“Adding Alphatek is part of our ongoing initiative of local Fuji service and support for our customers across every region of the country,” said Tom Zabkiewicz, executive vice president. “Having deep customer relationships is critical as we move into the next level of Smart Factory technology and low volume/high mix market requirements. We are excited to take these next steps in the region.”

About Fuji Corporation

Fuji Corporation is a market-leading supplier of surface mount technology (SMT) pick & place solutions, and has designed and manufactured many ground-breaking innovations in the circuit board assembly world. Fuji also offers a range of mounting machines, solder printers and production software that can easily integrate into a myriad of manufacturing environments to ensure that equipment runs competitively at all times. Service, training and support are provided by Fuji’s Global network of subsidiaries and official partners. Fuji Corporation’s North American Headquarters is located in Vernon Hills, IL, (near Chicago) as well as other North American regional offices and support centers in Fremont, CA, Guadalajara and Queretaro MX, and Ontario CN.  Visit www.fujiamerica.com, for further information on our comprehensive line of SMT product.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.