Hindley Appoints New Senior Buyer


Reading time ( words)

Keiran Casey has joined Hindley Circuits as a senior buyer. Keiran brings with him over four years of manufacturing operations experience, specializing in supply chain processes, having most recently worked as a productions operations coordinator at AVID Technology.

He also has a very keen interest in engineering, and earlier this year, successfully completed an HNC in Electrical and Electronics Engineering.

As part of his day-to-day activities, Keiran is responsible for managing buying procedures and processes, implementing cost down protocols and will be applying his technical knowledge to further lead and support the purchasing department. He will be in charge of performance management and auditing of suppliers monitoring quality and service.

Share

Print


Suggested Items

Semiconductors in Charge: The Changing Face of PCB Manufacturing

03/11/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Chuck Bauer and Dana Korf in a technical discussion that spanned a number of topics around shrinking components, such as redistribution layers (RDLs), active embeddeds, and why even the most revolutionary technologies must show ROI to be successful.

Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings

11/20/2019 | Phil Kinner, Electrolube
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.



Copyright © 2020 I-Connect007. All rights reserved.