Conecsus to Exhibit at SMTA Queretaro Expo & Tech Forum


Reading time ( words)

Conecsus, LLC will exhibit at the SMTA Queretaro Expo & Tech Forum on Thursday, August 15, 2019. The show and conference will be held at the Misión Grand Juriquilla, Queretaro, Blvd Villas Del Meson 56 Juriquilla, QR 76230 Mexico. Registration for the show, plus the technical sessions and lunch, are all free to attendees. Exhibit Hours are 11:00 a.m.-6:00 p.m.

Conecsus representative Roberto G. Valenzuela Camargo will illustrate how the company processes wastes containing primarily tin, tin-zinc, lead, silver, gold, and copper, and converts them into usable metal products, paying its customers back for their metals waste. Conecsus is an ISO 14001 EMS certified recycling company and a refiner of SMT solder/solder paste wastes and residues.

About Conecsus

Founded in 1980, Conecsus, LLC is a sophisticated ‘green’ recycler and refiner of SMT solder/solder paste wastes and residues, as well as tin, tin-zinc, lead, silver, gold, and copper from a variety of manufacturing industries. Located in Terrell, Texas, USA, Conecsus converts these wastes into usable metal products. Conecsus’ mission is to provide innovative and high-quality industrial byproducts management, metal recovery, and recycling options that provide world-class value and service to our customers, and display respect and stewardship toward the environment. For more information, visit www.conecsusllc.com.

Share

Print


Suggested Items

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)

07/24/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.

Approaches to Overcome Nodules and Scratches on Wire-Bondable Plating on PCBs

07/17/2019 | Young K. Song and Vanja Bukva, Teledyne Dalsa Inc., and Ryan Wong, FTG Circuits
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. This paper details if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 1)

07/16/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
Since 2006 and the implementation of the RoHS directive, the interest in bismuth-tin solder alloys—whose melting point around 140°C is very desirable because it allows for the use of lower temperature laminate materials and reduces thermal stress on sensitive components—has only increased as the industry has searched for Pb-free alternatives to the chosen standard, SAC305, which melts at considerably higher temperatures than the incumbent tin-lead alloys.



Copyright © 2019 I-Connect007. All rights reserved.