Essentra Components Clear Up EPDM vs. Silicone Confusion with Free Guide


Reading time ( words)

Responding to customer feedback, Essentra Components offer a simple guide to help clear up confusion over the use of EPDM vs. Silicone. So, what is the difference and when should one be used over the other?

The Essentra Components guide—available to download free at www.essentracomponents.com/en-gb/news/product-resources— covers the basics, similarities, pros and cons of each material with simple tables of performance, compatibility and common usages.  For example, explaining the popularity of EPDM the guides explains:

EPDM has a stable, saturated polymer backbone structure, which gives the material its advantages. Of all the rubbers, EPDM is the most water resistant, which is why it’s so popular for outdoor applications and is often used as a roofing material. EPDM stands up to harsh weather conditions such as sleet and snow. Another reason for its use outdoors, particularly in construction, is its excellent resistance to abrasions and tears and ability to stand up to the degrading effects of weathering, ozone and UV ray exposure.

EPDM also offers good electrical resistivity. Its chemical properties make it especially suitable for electrical insulation and gaskets. It resists polar solvents, and not just water, but also acids, alkalies, and phosphate esters. EDPM does a great job of withstanding steam and low and high temperatures, though silicone can take on even higher temperatures. The material has a low compression set, so it won’t lose much resilience over prolonged pressure.

For silicone we find that it is food safe and an incredibly versatile material, thanks to its chemistry and the many ways that it can be modified. Consequently, it offers vast possibilities.

Perhaps the most appealing characteristic of silicone is its ability to take on extremely high temperatures, which is why it’s especially popular for masking applications. Manufacturers will all give different melting points based on their experience and own criteria, but generally silicone can stand up to 232°C/ 450°F. Compare that to EPDM’s 148°C/300°F.

Examples of typical applications serve to illustrate key features of the industrial environment concerned and reasons for choosing either material. These include HVAC, enclosures, automotive, masking, construction, electronics, industrial, consumer appliances and cable management.

The final section of the guide gives a brief overview of how EPDM and Silicone compares with other rubbers, which include: natural rubber, SBR, NBR, neoprene.

About Essentra

In 2013, three companies - Moss, Skiffy, and Richco Inc. - combined to form Essentra Components EMEA. This provided our customers with an even greater selection of industrial components, with regional distribution sites across Europe and an international network extending to the Americas and Asia, including 12 principal manufacturing facilities and 47 sales and distribution operations.

Essentra plc is a FTSE 250 company and a leading global provider of essential components and solutions.  Through its three global divisions, Essentra focuses on the light manufacture and distribution of high volume, enabling components which serve customers in a wide variety of end-markets and geographies. Essentra’s global network extends to 33 countries and includes c. 8,000 employees, 49 principal manufacturing facilities, 64 sales & distribution operations and four research and development centres. For further information, please visit www.essentraplc.com.

Share

Print


Suggested Items

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.

The One Thing

05/14/2019 | Nolan Johnson, I-Connect007
The vast majority of the problems that we run into fall to the categories of communication and information. As with the old 'telephone game,' each time information goes from one party to another, the risk of misinterpretation increases. If we are given unclear information from a customer, we may not be able to give the right information to our partner.

Catching up With Darrel Yarbrough of YES

05/07/2019 | Dan Beaulieu, D.B. Management Group
Yarbrough Electronic Sales (YES) is one of the fastest growing contract manufacturers in the Southwest. As people get to know them better, they are becoming the go-to company in their area. In this interview, long-time industry veteran Darrel Yarbrough, owner of YES, provides a background about the company, its capabilities, and his outlook for the industry.



Copyright © 2019 I-Connect007. All rights reserved.