Indium to Feature “No-Spatter” Flux-Cored Wire at SMTA International


Reading time ( words)

Indium Corporation will feature its “no-spatter” flux-cored wire, Core 230-RC, at SMTA International, September 22-26, in Rosemont, Illinois, USA.

Indium Corporation’s Core 230-RC is specially developed to meet the demanding requirements of robotic and laser soldering. Fully REACH- and RoHS-compliant, it delivers an impressive <1% total flux spatter, as tested per IPC TM-650 2.4.48 standards.

Core 230-RC also performs exceptionally well in hand-soldering applications. Its “no-spatter” feature ensures that flux does not contaminate gold fingers or other contacts where it can interfere with circuit board electrical properties or spatter hot flux on operators’ hands. It is available in lead-free, tin-lead, and high-lead cored wires. Indium Corporation flux-cored wire offers:

  • Layers evenly wound onto spools to avoid tangles during use
  • Consistent diameters that meet the most stringent requirements
  • No flux voids within the wire for consistent, worry-free soldering

For more information about Indium Corporation’s flux-cored wires, visit www.indium.com/flux-and-epoxy/flux-cored-wire/ or visit Indium Corporation at booth #515.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.

90% Solder Dross Recovery: Eliminate Waste, Save Money

10/20/2020 | Nolan Johnson, I-Connect007
The impact of 90% solder dross recovery can have a substantial impact on reducing waste and increasing cost savings. Nolan Johnson recently spoke with Jay Hardin, MS2® product manager at P. Kay Metal, about the process and benefits of efficient solder dross recovery, as well as product roadmaps, the soldering machine market, and raw materials supply chain for solder alloy manufacturing. As Jay says, “For many companies, the savings are in the thousands or millions” of dollars.



Copyright © 2020 I-Connect007. All rights reserved.