Indium Expert to Present at 2019 ICEPT


Reading time ( words)

Indium Corporation’s Dr. Ning-Cheng Lee, vice president of technology, will share his industry expertise at the 20th International Conference on Electronic Packaging Technology (ICEPT 2019) on August 11-15, Hong Kong, China.

Fluxes Suppressing Non-Wet-Open during BGA Assembly will examine the increasing severity of warpage and non-wet-open (NWO) defects during BGA assembly due to the continuing advancement of miniaturization. He will discuss how a “cold-welding barrier” method utilizing a flux coating has been developed to suppress NWO defects.

He will also present Novel Fluxes with Decreased Viscosity after Reflow for Flip-Chip and SIP Assembly, which discusses the development of fluxes developed for flip-chip and system-in-package (SIP) assembly. These fluxes have high-viscosity and high-tack to secure components during placement and reflow, but have low-viscosity after reflow to allow the flux residue to be cleaned.

Dr. Lee will also present the short course Achieving High Reliability for Lead-Free Solder Joints – Materials Consideration. This very popular course details the material considerations required for achieving high-reliability in lead-free solder joints. The goal of this course is to provide participants with the understanding of how various factors contribute to failure modes, and how to select proper solder alloys and surface finishes for achieving high-reliability.

Dr. Lee is a world-renowned soldering expert, an SMTA Member of Distinction, and IEEE Fellow. He has extensive experience in the development of fluxes, alloys and solder pastes for SMT industries, and extensive experience in the development of high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. In addition to SMT and semiconductor soldering materials, his research also extends to nanobonding technology and thermal conductive materials.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include

solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, Indium has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com

 

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.



Copyright © 2020 I-Connect007. All rights reserved.