ZESTRON Academy to Host FREE 'Surface Cleanliness Assessment' Webinar


Reading time ( words)

ZESTRON will host “Surface Cleanliness Assessment” on Thursday August 29, from 1:30 p.m. to 2:30 p.m. EDT. This is the sixth installment of the 2019 ZESTRON Academy Cleaning Webinar Series. Our presenter will be electronics cleaning expert, Umut Tosun, M.S.Ch.E, application technology manager.

Webinar Abstract:

How clean is clean? When manufacturing electronic assemblies, impurities left on a board’s surface or underneath components may lead to field failures. This ZESTRON Academy webinar provides an overview of the tools and methods available to properly assess the cleanliness of electronic assemblies after the cleaning process.

About ZESTRON

ZESTRON is headquartered in Manassas, Virginia and operates in more than 35 countries. With eight technical centers worldwide and the industry’s most knowledgeable team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information or to tour one of our technical centers, please visit www.zestron.com.

Share

Print


Suggested Items

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

One Fish, Two Fish, Red Fish, Blue Fish: Same Industry, New Look

05/22/2020 | I-Connect007 Research Team
Learning a lesson from challenges is one thing, but implementing changes based on those lessons is quite another. I-Connect007 regularly surveys leaders in the electronics industry to bring you important and relevant information that helps you make better decisions. What lessons have you learned during the COVID-19 crisis, and what changes have you made?

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.



Copyright © 2020 I-Connect007. All rights reserved.