Robotic Soldering from Metcal at NEPCON Asia


Reading time ( words)

Metcal plans to exhibit in Booth 1E25 at NEPCON Asia, scheduled to take place August 28-30, 2019 at the Shenzhen Convention and Exhibition Center. Representatives from Metcal will demonstrate its new robotic soldering system, the connection validation (CV) soldering system with new hand-pieces, AC-STC Tip Cleaner, HCT2-200 Hot Air Pencil and VFX–1000 Fume Extraction unit.

Robotic Soldering System

Metcal’s Robotic Soldering System with patented Connection Validation (CV) technology and a touchscreen graphical user interface is designed to drastically mitigate the risk of solder joint defects and add productivity to the manufacturers’ soldering process.

CV Soldering System

Metcal will show its new CV hand-pieces and assorted cartridges that transform the CV-5200 soldering system into the solution for even the most challenging soldering applications. All of the hand-pieces are now available with a number of unique tip cartridge geometries. The tip cartridges are available in a variety of temperature series.

HCT2-200 Digital Hot Air Pencil

Metcal’s new Digital Hot Air Pencil was developed for very small surface mount component and package sizes (1206s and smaller) and low board densities. As component miniaturization continues (e.g. 01005 components), the ergonomics of a pencil become more important to allow a user freedom to access and rework components on the board without affecting adjacent parts. 

AC-STC Solder Tip Cleaner

Metcal’s innovative Solder Tip Cleaner features a replaceable brush system that pulls excess solder away from the tip into a removable collection tray for disposal while removing oxidation from the tip. Solder tips represent a significant portion of the cost of ownership for a solder station, and Metcal’s new Solder Tip Cleaner removes oxidation and extends the life of the solder tip.

VFX–1000 Fume Extraction

The VFX–1000 Fume Extraction unit is Metcal's next-generation under-the-bench fume extraction unit. Its improved pre-filter provides higher efficiency, and its enhanced gas filter that is a 50/50 mix of Activated Aluminum Potassium Permanganate and Active Carbon allows for a wider range of fume extraction.

About Metcal

Metcal is a benchtop solutions expert that has delivered broad value to customers since its Silicon Valley beginnings in 1982. Offering unrivalled performance, risk mitigation, and ROI, we give electronics manufacturers in automotive, aerospace, medical devices and military sectors the tools—and the confidence—they need to develop faster, safer, more advanced products. Metcal provides advanced technology products across hand soldering, convection rework, fume extraction, and fluid dispensing applications. For more information, visit metcal.com.

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.