Green Circuits Hosts Latest IPC Video Production on Selective Soldering


Reading time ( words)

Joe O’Neil, CEO of Green Circuits and IPC Board member, invited IPC into Green Circuits’ San Jose, California, facility to shoot footage for three new IPC videos including: selective soldering, print reading, and soldering iron tip care.

“It was a busy week, and everyone at Green Circuits was most gracious and accommodating. Staff went way out of their way to help us and made us feel welcome and fully supported,” said Mark Pritchard, IPC video producer. “It worked out perfectly, in that they had multiple machines and we were able to shoot everything we needed to show without holding up production.”

Hai Ma, Andy Nguyen and Michael Nguyen of Green Circuits in San Jose help create new IPC Training video on Selective Soldering.

Michael Nguyen hosted the production, with support from Ty Le and Shawn Pham. Machine technicians Hai Ma and Andy Nguyen provided the technical simulations.

IPC sincerely appreciates this contribution to the educational advancement of our industry.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.