Rehm Thermal Systems to Present Product Portfolio at Important Asian Trade Fairs


Reading time ( words)

Some of the most important trade fairs in the electronics sector will be taking place in Asia in the next few weeks: Nepcon South China (Shenzhen), Nepcon Vietnam, and Semicon Taiwan. Rehm Thermal Systems will also be exhibiting its product portfolio at these trade fairs and introducing visitors to Rehm’s new developments and innovations in system and process technologies. Attendees will also be able to talk to the Rehm team at the events.

rehm2.jpgFirst up is Nepcon South China, from 28th to 30th August at the Shenzhen Convention & Exhibition Centre in Shenzhen. At Stand 1J55 Rehm Thermal Systems will present the VisionXP+ Vac convection soldering system. This system can reliably eliminate pores, gas cavities and voids in a vacuum chamber directly after the soldering process whilst the soldering material is still in an optimum melted state. The CondensoXC condensation soldering system and the ProtectoXC coating system will also be presented at Nepcon South China. The CondensoXC is a space-saving, high-performance vapour-phase system for laboratory applications, small-batch production, or prototyping. The ProtectoXC is ideal for coating small batch sizes and is also suitable for production environments thanks to its small footprint.

rehm3.jpgNepcon Vietnam will open its doors to trade fair visitors from 11th to 13th September. The Rehm team looks forward to welcoming you to I.C.E. Hanoi (Cung Van Hoa) at Stand I14. We will be able to discuss the latest trends and innovations in the electronics sector with you at the stand and share our experiences. From 18th to 20th September, Rehm Thermal Systems will be sharing a stand with the Taiwanese distributor Titan-Semi Co. Ltd. at Semicon Taiwan in the Nangang Exhibition Centre in Taipeh. The stand number will be K2268. At Semicon Taiwan, Rehm will be presenting the VisionX Semico 834 convection soldering system, which has been specially designed for semiconductors. The VisionX Semico is based on the proven VisionX series, which has been successfully established in the reflow soldering market for years. The optimal heat transfer through specially developed nozzle fields ensures a small delta T and thus the best process performance. The low-vibration transport, whether as braided belt, pin chain, combination transport or as single or dual lane, meets the high demands of semiconductor production and ensures additional process reliability.

About Rehm Thermal Systems

As an expert in the field of thermal systems for the electronics and photovoltaics industry, Rehm is one of the leaders in terms of technology and innovation in the modern and cost-efficient production of electronic assemblies. As a global manufacturer of reflow soldering systems with convection, condensation or vacuum technology, drying or coating systems, functional test systems, equipment for the metallisation of solar cells and numerous customer-specific special installations, we are represented in all the relevant growth markets. As a partner with almost 30 years of experience in this industry, we implement innovative production solutions that set standards.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.

90% Solder Dross Recovery: Eliminate Waste, Save Money

10/20/2020 | Nolan Johnson, I-Connect007
The impact of 90% solder dross recovery can have a substantial impact on reducing waste and increasing cost savings. Nolan Johnson recently spoke with Jay Hardin, MS2® product manager at P. Kay Metal, about the process and benefits of efficient solder dross recovery, as well as product roadmaps, the soldering machine market, and raw materials supply chain for solder alloy manufacturing. As Jay says, “For many companies, the savings are in the thousands or millions” of dollars.



Copyright © 2020 I-Connect007. All rights reserved.