Seika to Showcase Routers, PCB Cleaners and More at SMTAI


Reading time ( words)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, today announced plans to exhibit in Booth #410 at SMTA International, scheduled to take place Sept. 24-25, 2019 at the Stephens Convention Center in Rosemont, Illinois. Seika will showcase a complete line up of leading-edge equipment, including the latest models from McDry, Sayaka, SAWA, Unitech and MALCOM. 

The Sayaka SAM-CT23S tabletop router with color CCD camera offers automatic alignment compensation with fiducial marks and automatic program change with QR code. With AC115V operation, no compressed air is necessary.  Advanced image processing software allows easy programming and CAD based offline programming.

The SAWA SC-145GAE Ultrasonic Squeegee Cleaner presents a new solution for lead-free solder pastes for squeegees as well as other tools such as scrapers, spatulas and misprinted PCBs. It features easy operation, a synchronous ultrasonic effect, and is compatible with the SAWA Fully Automatic. The X-and Y-axis of ultrasonic waves are synthesized in the 13 liter tank, working with the solvent to maximize cleaning ability.

Seika also will highlight the UNITECH UC-250M-CV PCB Board Cleaner. The UC-250M-CV takes all the features of the UC-250M and adds a dual cleaning feature using a combination of a brush roller with the silicone/adhesive cleaning rollers. The combination dual dust removal system assures better results than a single brush or adhesive roller system.

The MALCOM RCX Series Modular Reflow Oven Profiling System offers complete profiling of reflow ovens, including oven temperature, video imaging, O2 concentration and convection air velocity. It verifies that ovens are performing at optimal conditions, and enables users to troubleshoot problem areas.

The MALCOM PCU-02V Spiral Viscometer is designed for expensive material testing and analysis by obtaining the viscosity characteristics with only a 0.2cc sample. MALCOM’s unique Spiral Sensor provides continuous measurement of non-newtonian fluids with good repeatability.

The award-winning McDry MCU-201A, 1%RH model with new, optimized fast dehumidification drying unit and data logger also will be featured at the show.

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

For more information visit www.seikausa.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.