BTU International to Highlight Vacuum Reflow at SMTAI


Reading time ( words)

BTU International, Inc. will exhibit at SMTA International, scheduled to take place September 24-25, 2019 at the Stephens Convention Center in Rosemont, Illinois. The company will highlight its PYRAMAX Vacuum reflow oven in booth #816.   

BTU has made the PYRAMAX Vacuum available for demonstration and product development by stationing a unit at ACI Technologies in Philadelphia, PA. At ACI customers can not only operate the vacuum reflow oven, but have access to the required process equipment and metrology as well.

The PYRAMAX Vacuum reflow oven has been designed around the requirements of large EMS/high-volume automotive customers. The unit is configured with 10 zones of closed-loop convection heating and a maximum production width of 18". Nitrogen atmosphere capable, the PYRAMAX Vacuum reflow oven offers a maximum process temperature of 350°C.

The unit features integrated controls with BTU’s proprietary Wincon Windows-based control system and full integration with factory MES/Industry 4.0 including the vacuum parameters. Additional features include:

  • Automatic sequencing
  • Programmable control of vacuum level and hold time
  • Pass-through mode for non-vacuum operation

Existing PYRAMAX customers can easily transfer their process to the new PYRAMAX Vacuum reflow oven.

About BTU International

BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment in the electronics manufacturing market.  BTU’s high-performance reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes. BTU also specializes in precision controlled, high-temperature belt furnaces for a wide range of custom applications, such as brazing, direct bond copper (DBC), diffusion, sintering and advanced solar cell processing. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia and Europe. Information about BTU International is available at www.btu.com.

Share

Print


Suggested Items

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2021 I-Connect007. All rights reserved.