SN100C Celebrates 20 Years of Reliability Service


Reading time ( words)

Nihon Superior Co. Ltd., an advanced joining material supplier, plans to exhibit in booth #518 at 2019 SMTA International, scheduled to take place September 24-25, 2019 at the Donald Stephens Convention Center in Rosemont, Illinois. The company will celebrate the achievements produced by the well-known SN100C lead-free alloy. TipSave N flux-cored solder wire will be introduced and SN100CV P608 D4 solder paste will be shown.

SN100C has been widely accepted as a leading lead-free soldering alloy since it was invented by Nihon Superior’s President Tetsuro Nishimura. The silver-free SN100C alloy delivers a stable microstructure in an alloy that can accommodate the long-term cyclic strains and impact loading to which a solder joint can be subjected. The micro-addition of nickel enhances the performance of SnCu resulting in smooth and bright fillets with few shrinkage defects and a stable microstructure with minimal growth of the interfacial intermetallic, ensuring highly reliable solder joints.

The newly developed TipSave N flux cored solder wire extends soldering iron tip life by 3X.  Paired with the (032) no-clean, halogen-free cored-flux, it provides fast wetting and low spattering. TipSave N is a good match for hand soldering as well as continuous robotic soldering as it reduces required soldering tip change overs, increasing production while reducing cost.

SN100CV P608 D4 is a completely halogen free, lead-free, no-clean solder paste. Unlike silver-containing alloys that derive their strength from a dispersion of fine particles of eutectic Ag3Sn, SN100CV gains its strength from solute atoms in the tin matrix of the joint. The paste provides excellent wetting and reduces voiding.

Nihon Superior continues to offer solutions to the challenges facing the electronics industry, such as improvements in reliability, thermally stable joining, and lead-free die attach. For more information about Nihon Superior’s new solder pastes and lead-free products, visit us at booth #518 or at  www.nihonsuperior.co.jp/english.

About Nihon Superior Co., Ltd.

Nihon Superior was founded in 1966 when it began marketing unique flux products imported from the US. The company made its mark on society by gathering the most advanced soldering and brazing technologies and products from around the world, and supplying them to companies in the metal-joining industry. A turning point for the company came when it started developing its own soldering materials and with the success of its unique SN100C lead-free solder alloy Nihon Superior has become a major player in the global market. To support the growing demand for its products, Nihon Superior has established manufacturing and sales centers in Japan, China and other Asian countries, and the United States, and formed business partnerships with companies in other markets.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

PCB Design Training: More Critical Than Ever

09/05/2019 | Andy Shaughnessy, Design007 Magazine
I interviewed Gary Ferrari of FTG at the IPC High-Reliability Forum and Microvia Summit in Baltimore. Gary is a co-founder of the IPC Designers Council and a longtime advocate for PCB design and PCB designers. We discussed the crucial role that PCB designers play in the entire electronics development process, and how IPC and the Designers Council are helping to educate and inform the next generation of designers.

eSMART Factory Conference 2019, Day 1

09/02/2019 | Happy Holden, I-Connect007
The recent eSMART Factory Conference in June in Dearborn, Michigan, was the second annual conference on the smart factory. SMTA described it as "A technical conference with a focus on electronics manufacturing from software systems/processes to augmented reality and smart inspection." In this article, Happy Holden gives us the highlights of the conference.



Copyright © 2019 I-Connect007. All rights reserved.