SEHO to Exhibit at SMTAI


Reading time ( words)

SEHO North America, Inc. will exhibit at SMTA International, scheduled to take place September 24-25, 2019 at the Donald Stephens Convention Center in Rosemont, Illinois. Meet the SEHO experts in booth #309.

SEHO constantly develops its range of soldering solutions and will introduce the new StartSelective – the perfect plug-and-produce selective soldering system for those just entering into automated soldering.

The StartSelective is thought through down to the last detail, from its compact design, ease of operation and many technical highlights. With a footprint of only 2.5 m², the StartSelective provides maximum quality and reproducibility of soldering results for assemblies up to 20" x 20" and an outstanding return on investment.

While all process steps are fully automated and monitored, loading and unloading of assemblies is done manually.

The bottom-side preheat section of the StartSelective is equipped with pulsar heaters over the full area, which can be activated individually depending on board dimensions. Pulsar heaters feature a high energy density and quick reaction time. This enables a remarkable reduction in energy consumption.

An additional top-side IR preheating ensures permanent and controlled heat support during long cycles.

Another highlight is the optimized soldering area with non-wetted mini-wave solder nozzles, featuring a 7° soldering angle. The nozzles convince with stable and reproducible flow properties, resulting in outstanding soldering quality. Even difficult geometries can be soldered easily. Moreover, non-wetted solder nozzles are maintenance-free and feature a nearly unlimited lifetime, thus avoiding follow-up costs.

Just like the high-volume selective soldering systems from SEHO, the StartSelective is equipped with a complete package for automated process control. The system is designed for maximum efficiency. Programming is 100 percent offline at any PC workplace so that the machine is always available for production.

All setup, retooling and maintenance are easily accessible on one side of the machine. This design allows users to integrate the StartSelective in any production island with minimum footprint requirements, or to place it as stand-alone system in the corner of the production floor.

The SEHO team is looking forward to welcoming visitors to Booth #309 during the SMTA International. For more information, visit www.seho.de.

Share

Print


Suggested Items

Stencils: Not As Simple As They Seem

02/26/2020 | I-Connect007 Editorial Team
Stephanie Hardin of Integrated Ideas and Technologies Inc. discusses her role in the supply chain as a stencil manufacturer, improvements she sees from micromachined step stencils, and why she believes trying to have standardized stencil layouts is wishful thinking due to the many fluctuating variables.

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

Blackfox Trains Veterans for Good Manufacturing Jobs

12/31/1969 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.



Copyright © 2020 I-Connect007. All rights reserved.