MacDermid Alpha‘s Assembly Division to Present Low-Temp Lead-Free Alloys at SMTA China South


Reading time ( words)

The assembly division of MacDermid Alpha Electronics Solutions, a world leader in the production of electronics soldering and bonding materials, will present the technical paper “The Impact of Alloy Composition on Shear Strength for Low Temperature Lead Free Alloys“ at the SMTA China South Technical Conference on August 28-29, 2019.

Low temperature assembly processes are continuing to rise in popularity throughout the electronics assembly industry and Sn-Bi based alloys act to enable this transition. Reduced temperatures bring a sum of benefits: minimized expansion/shrinkage due to CTE mismatch, reduced dynamic warpage, lower thermal stress of sensitive materials, and energy conservation for environmental conservation. At elevated temperatures, mismatched coefficients of thermal expansion cause added stress on the solder joint. Strain loads can result in solder joint degradation and may lead to joint failure due to crack propagation through the solder joint fillet. To overcome these challenges, MacDermid Alpha employed new low-temperature alloys and chemistry platforms for the introduction of novel low-temperature solder pastes. The new alloy discussed in this technical paper (X46) is a Sn-Bi system with micro-additives that further improves the base alloy properties, resulting in performance similar to SAC305. In this paper, Annie Yang will focus on addressing the mechanical performance of the joint which is characterized using a shear test for passive components. 

Annie Yang, Regional Marketing Manager, will deliver this presentation at 11:05am on Thursday, August 29 at the SMTA China South Technical Conference. Meet her at Booth 1A80. Hall 1, Shenzhen Convention & Exhibition Centre, Shenzhen, China. 

About MacDermid Alpha Electronics Solutions

Through the innovation of specialty chemicals and materials under our Alpha, Compugraphics, and MacDermid Enthone brands, we provide solutions that power electronics interconnection.  We serve all global regions and every step of device manufacturing within each segment of the electronics supply chain. The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate in design, implementation, and technical service to ensure success for our partner clients.  Our solutions enable our customers’ manufacture of extraordinary electronic devices at high productivity and reduced cycle time. Find more at MacDermidAlpha.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.