Seica to Exhibit at SMTA International


Reading time ( words)

Seica will be exhibiting at the Rosemont, Illinois Conference and Convention Center on September 24-25 in booth 415.

On exhibition will be Seica's new desktop Dragonfly AOI inspection system, which utilizes leading-edge LED technology to perform conformal coat and through-hole-technology inspection, including presence checks of pins and solder, effectively combining two distinct inspection processes in a single machine.

The Dragonfly is easily able to detect UV trace elements in a variety of conformal coat chemistries but also allows for quick and accurate detection of contamination at the micron level, de-lamination of the conformal coat, air gaps/voids, and many other defects not detectable with the naked eye or traditional AOI systems.

The Dragonfly is available in two models: a low-cost, desktop version with a drawer that allows for easy manual PCB loading, and an in-line SMEMA-compliant system which is Factory 4.0 ready and can include additional options, such as side access inspection of conformal coat, as well as thickness measurements. Come visit our booth and talk with our sales and technical staff.

About Seica

Founded in 1986, Seica S.p.A. is a global supplier of automatic test equipment and selective soldering systems, with an installed base of more than 2200 systems on 4 different continents. Seica offers a complete line of proprietary test solutions, and has established strong partnerships with leaders of manufacturing and inspection systems to enlarge the portfolio of solutions across the whole production line. In a time of continuous changes, where globalization challenges competitiveness, Seica drives its strategy with local direct presence in Italy, France, Germany, USA, Mexico and China, best service and support quality with a local, strong, professional team.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.