SEHO to Exhibit with Bergen Systems Pvt. Ltd. at productronica India


Reading time ( words)

SEHO Systems GmbH will exhibit at productronica India, scheduled to take place Sept. 25-27, 2019 at the India Exposition Mart Limited in Greater Noida, India. SEHO will display the new StartSelective soldering system in Hall No 15, Booth PE27 with its representative Bergen Systems Pvt. Ltd.

SEHO constantly develops its range of soldering solutions and will introduce the new StartSelective – the perfect plug-and-produce selective soldering system for those just entering into automated soldering.

The StartSelective is thought through down to the last detail, from its compact design, ease of operation and many technical highlights. With a footprint of only 2.5 m², the StartSelective provides maximum quality and reproducibility of soldering results for assemblies up to 20" x 20" and an outstanding return on investment.

While all process steps are fully automated and monitored, loading and unloading of assemblies is done manually.

The bottom-side preheat section of the StartSelective is equipped with pulsar heaters over the full area, which can be activated individually depending on board dimensions. Pulsar heaters feature a high energy density and quick reaction time. This enables a remarkable reduction in energy consumption.

An additional top-side IR preheating ensures permanent and controlled heat support during long cycles.

Another highlight is the optimized soldering area with non-wetted mini-wave solder nozzles, featuring a 7° soldering angle. The nozzles convince with stable and reproducible flow properties, resulting in outstanding soldering quality. Even difficult geometries can be soldered easily. Moreover, non-wetted solder nozzles are maintenance-free and feature a nearly unlimited lifetime, thus avoiding follow-up costs.

Just like the high-volume selective soldering systems from SEHO, the StartSelective is equipped with a complete package for automated process control. The system is designed for maximum efficiency. Programming is 100 percent offline at any PC workplace so that the machine is always available for production.

All setup, retooling and maintenance are easily accessible on one side of the machine. This design allows users to integrate the StartSelective in any production island with minimum footprint requirements, or to place it as stand-alone system in the corner of the production floor.

For more information, meet the SEHO team at productronica India in hall 15 booth PE27, or visit www.seho.de.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

PCB Design Training: More Critical Than Ever

09/05/2019 | Andy Shaughnessy, Design007 Magazine
I interviewed Gary Ferrari of FTG at the IPC High-Reliability Forum and Microvia Summit in Baltimore. Gary is a co-founder of the IPC Designers Council and a longtime advocate for PCB design and PCB designers. We discussed the crucial role that PCB designers play in the entire electronics development process, and how IPC and the Designers Council are helping to educate and inform the next generation of designers.

eSMART Factory Conference 2019, Day 1

09/02/2019 | Happy Holden, I-Connect007
The recent eSMART Factory Conference in June in Dearborn, Michigan, was the second annual conference on the smart factory. SMTA described it as "A technical conference with a focus on electronics manufacturing from software systems/processes to augmented reality and smart inspection." In this article, Happy Holden gives us the highlights of the conference.



Copyright © 2019 I-Connect007. All rights reserved.