Ascentech to Exhibit at SMTAI


Reading time ( words)

Ascentech LLC will be exhibiting GEN3 Systems’ most recent enhancements to its already popular AutoSIR2+ (Surface Insulation Resistance) and AutoCAF2+ (Conductor Anodic Filament) test equipment at SMTAI 2019 in booth #1016. Ever-increasing demands for higher voltage testing capability, longer test durations, and the capability for simultaneous testing are met by the GEN3 Systems’AutoSIR2+ and AutoCAF2+  testers, whose features include totally revised software for both instruments; the ability to simultaneously run 3 different bias voltages; high Voltage CAF Testing to 1,250V (specific controlled applications); and more.

Also, the popular GEN3 Gensonic Stencil Cleaner will be on display. Gensonic is a manually-operated, ultrasonic transducer unit for cleaning stencils used in printing solder pastes and adhesives. It can be used either directly on the printer or at a separate cleaning station.

Ascentech will also exhibit the complete line of industrial inspection cameras, plus their new updated Pro-X software suite. INSPECTIS’ Pro-X is an easy-to-use software developed for viewing live images and capturing still images and video from the full range of Inspectis HD, Full HD and 4K digital microscopes. In addition to image view and capture features, Inspectis software provides powerful tools for calibration of device magnification, geometrical measurements, live image overlays and annotations on still images.

About Ascentech, LLC

Ascentech, LLC is a technology and solutions provider and distributor to the electronics manufacturing and assembly industry with nearly 20 years’ experience. Ascentech is the North American Distributor for Inspectis Optical Systems AB, well as GEN3 Systems, and also supplies the industry with other testing and process optimization solutions for electronics manufacturing. To learn more, visit www.ascentechllc.com. 

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.