Goepel electronic Inspection Systems Guarantee MES Connection


Reading time ( words)

Goepel electronic’s PILOT Connect software now ensures that inspection systems from the company, even those from other vendors, can easily connect to any manufacturing execution system (MES) in the factory. It guarantees an integration of the respective AOI, AXI or SPI system into the MES infrastructure of the customer within a few weeks, at the latest with the installation of the system on-site at the user.

Standard interfaces such as ZVEI, iTAC, Aegis, SECS/GEM, GEP, CAM, and the most recently released IPC CFX are supported. The systems can also interact with customer specific MES solutions. The fast connection is achieved by a sophisticated plug-in system of PILOT Connect. With a ready-to-use framework, the communication is realized by an own development team in exchange with the customer, even at short notice. In addition, there is sufficient flexibility to respond to custom demand from manufacturers.

In the PILOT Connect interface to the MES, data exchange takes place either on a pure result level (unidirectional) with product-specific control and process interlocking (bidirectional), or with production data acquisition. Extensive statistical evaluation options for all connected systems are available, as well as central repair or verification stations with display options for all inspection results involved.

Share

Print


Suggested Items

To Improve the Standards Process, Get Involved

09/13/2019 | I-Connect007 Editorial Team
Jan Pedersen, senior technical advisor at Elmatica, and Ray Prasad, president of Ray Prasad Consultancy Group, spoke with the I-Connect007 team about the current state of PCB standards and where the process might need improvements, including the many difficulties around transparency, slow updates, limitless numbers of variations, and a variety of other topics.

PCB Design Training: More Critical Than Ever

09/05/2019 | Andy Shaughnessy, Design007 Magazine
I interviewed Gary Ferrari of FTG at the IPC High-Reliability Forum and Microvia Summit in Baltimore. Gary is a co-founder of the IPC Designers Council and a longtime advocate for PCB design and PCB designers. We discussed the crucial role that PCB designers play in the entire electronics development process, and how IPC and the Designers Council are helping to educate and inform the next generation of designers.

eSMART Factory Conference 2019, Day 1

09/02/2019 | Happy Holden, I-Connect007
The recent eSMART Factory Conference in June in Dearborn, Michigan, was the second annual conference on the smart factory. SMTA described it as "A technical conference with a focus on electronics manufacturing from software systems/processes to augmented reality and smart inspection." In this article, Happy Holden gives us the highlights of the conference.



Copyright © 2019 I-Connect007. All rights reserved.