Saki to Demonstrate 3D AOI and 3D AXI Off-line Programming Live at SMTAI


Reading time ( words)

Saki Corporation will present its 3D automated optical inspection (AOI) system and BFX-Editor automated x-ray inspection (AXI) off-line programming and debugging software at SMTA International in booth 430.

Saki's 3Di Series is the fastest AOI system in the industry. It has scalable resolutions of 7µm, 12µm, and 18µm, closed-loop functionality, and a sturdy frame with a dual-drive system resulting in accuracy, stability, and reliability. It comes with the newly released Saki Self-Programming (SSP) software, which doesn't require programming or a golden board and, in a matter of minutes, completely programs and verifies the inspection process in real time, eliminating variables and operator error. SSP software makes inspection faster and easier, especially for EMS companies with high-mix, low-volume environments such as NPI. Visitors to the Saki booth will be able to see a live demo of Saki's latest 3D-AOI system and this new self-programming function.

In addition to its 3D-AOI software, Saki will introduce its x-ray programming system for its inline 3D AXI volumetric measurement and inspection system. The system identifies and classifies defects, including 100% of head-in-pillow defects, voids, and dry joints, and enables land grid array (LGA) inspection and measurement. Its off-line programming and debugging software, the BFX-Editor, lets you create, edit, and debug inspection programs on your PC and generates inspection data prior to production.

Saki has a complete line of automated inspection equipment, including 2D AOI, 2D bottom-side AOI, and 3D SPI, AOI, and AXI systems. Built on the foundation of Quality Driven Production (QDP), which is based on quality, reliability, consistency, and ease of use, Saki's systems are used to inspect electronic assemblies that operate in high-reliability environments like medical, automotive, and aerospace where failure is not an option.

SMTA International is being held at the Donald Stephens Convention Center, Rosemont, Illinois on September 24 and 25, 2019. 

About Saki Corporation

Since its inception in 1994, Saki has led the way in the development of automated recognition through robotic vision technology. Saki's 3D automated solder paste, optical, and x-ray inspection systems (SPI, AOI, AXI) have been recognized to provide the stable platform and advanced data capture mechanisms necessary for true M2M communication, improving production, process efficiency, and product quality. Saki Corporation has headquarters in Tokyo, Japan, with offices, sales, and support centers around the world.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.