TRI Brings Test and Inspection Solutions to SMTA Guadalajara 2019


Reading time ( words)

Test Research, Inc. (TRI) will join SMTA Guadalajara 2019 to showcase its test solutions and inspection solutions for the SMT industry. Visit the TRI/SMT Integration Booth at Expo Guadalajara in booth #613 from October 23−24, 2019 to learn more about the latest innovations in 3D SPI, 3D AOI, 3D CT AXI, and multicore ICT.

TRI’s 2019 lineup features the industry-leading 3D AOI TR7500QE equipped with five cameras for multi-angle inspection, digital fringe pattern projectors and a 3D laser module for inspecting reflective surfaces. TRI will also feature the leading 3D SPI TR7007QI, for accurate shadow-free solder inspection with digital fringe projectors and smart board warpage control. TRI solutions are Smart Factory Ready, as they support the latest M2M Connection protocols, such as the IPC-Hermes-9852 standard.

TRI is celebrating its 30th anniversary as a leading test and inspection solutions provider for the electronics manufacturing industry. Join us at SMTA Guadalajara 2019 booth #613 for a personal demonstration of TRI's world-class test and inspection solutions lineup.

About TRI

TRI offers the most robust product portfolio in the industry for automatic test and inspection solutions. From solder paste inspection (SPI), automated optical inspection (AOI), and 3D automated X-ray inspection (AXI) systems to manufacturing defect analyzers (MDAs), functional testers (FCT) and in-circuit testers (ICT), TRI provides the most cost-effective solutions to meet a comprehensive range of manufacturing test and inspection requirements.

About SMT Integration

SMT Integration provides innovative solutions for the SMT and process handling equipment industry. SMT Integration is TRI’s partner in Mexico. For more information, please visit https://www.smtintegration.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.