Nordson ASYMTEK Demonstrates at Bondexpo 2019


Reading time ( words)

Nordson ASYMTEK, a Nordson company, will demonstrate its Helios SD-960 Series Automated Fluid Dispensing System at Bondexpo, Stuttgart, Germany, in hall 6, stand 6425. The Helios dispenser deposits single- (1K) and two-component (2K) materials, such as abrasive thermal interface materials (TIM), silicones, epoxies, and greases. Applications include electronic and PCB assembly that requires sealing, gasketing, potting, and structural adhesives/staking for automotive, avionics, aerospace & military electronics, consumer electronics/telecom, and/or industrial products. Bondexpo is being held at Messe Stuttgart in Stuttgart, Germany, from October 7-10, 2019.

"The Helios dispenser is successfully dispensing large- to mid-sized fluid volumes in applications where accuracy and performance are critical. With integrated valves and mixers, the Helios system offers high levels of flexibility with software programming and process control typically found in precision dispensers designed for smaller volumes applied in microelectronics," said Almar Thewissen, product manager for Nordson ASYMTEK.

The Helios system can be equipped with dispense valves or 1K or 2K fluid systems. Volumetric 2K metering with servo control provides a highly controlled mix ratio that ensures correct fluid characteristics. Being able to dispense thermal interface materials reduces the use of pre-cut thermal pads, makes changes in the production process easier and more flexible, and reduces costs. Proven dispensing software with free, programmable dispense geometries eliminates the need to hire a programmer to make changes.

The Helios system accommodates a variety of bulk fluid supply options. Various size reservoirs, fluid regulators, booster pumps, level sensors, and more can be selected to fit specific fluid and application requirements. The fluid system controls are integrated into the machine platform and controlled by dedicated dispensing software.

About Nordson ASYMTEK

Nordson ASYMTEK, a world leader in precision fluid dispensing, conformal coating, and jetting technologies, designs and manufactures dispensing and coating systems, supported by an award-winning global applications and service network for over 35 years. To find out more, visit www.NordsonASYMTEK.com, or on social media.

About Nordson Corporation

Nordson Corporation (Nasdaq: NDSN) is one of the world's leading producers of precision dispensing equipment that applies adhesives, sealants, coatings, and other materials to a broad range of consumer and industrial products during manufacturing operations. The company also manufactures equipment used in the testing and inspection of electronic components as well as technology-based systems for curing and surface treatment processes. Headquartered in Westlake, Ohio, Nordson has direct operations and sales support offices in more than 30 countries.

Share

Print


Suggested Items

KYZEN’s Tom Forsythe: The Effects of COVID-19

05/15/2020 | Barry Matties, I-Connect007
On May 7, Barry Matties and Tom Forsythe, executive vice president at KYZEN, discussed the effects of COVID-19. During the conversation, Forsythe addressed KYZEN’s strategy to keep the staff and employees healthy as the foremost concern. He also detailed recent changes in interacting with customers and his take on what will be the new long-term changes in how the company does business versus short-term accommodations.

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

I-007e Micro Webinar: Primary Flight Control Case Study on Condensation and Coverage

02/26/2020 | I-Connect007 Editorial Team
The seventh episode of the popular webinar series “Coatings Uncoated!” is now available to view. Author of "The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments" and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.



Copyright © 2020 I-Connect007. All rights reserved.