SMTA Welcomes New Board Members


Reading time ( words)

The SMTA has announced the election results for the Global Board of Directors for the term beginning September 22, 2019 during SMTA International. Sal Sparacino, ZESTRON Americas, was re-elected as VP Communications. Julie Silk, Keysight Technologies; Ivan Roman, Continental Powertrain; and Robert Boguski, Datest Corporation; have been newly elected to the Board of Directors.

Those remaining on the SMTA Global Board of Directors include: President, Jeff Kennedy; Treasurer, Robert Kinyanjui, Ph.D., John Deere Electronic Solutions, Inc.; VP Communications, Sal Sparacino, ZESTRON Americas; VP Tech Programs, Richard Coyle, Ph.D., Nokia Bell Labs; VP Expos, Debbie Carboni, KYZEN Corporation; VP Membership, Gregory Vance, Rockwell Automation; Strategic Development Committee members include chairperson Bill Cardoso, Ph.D., Creative Electron, Inc.; William Capen, Honeywell FM&T; and Tim Jensen, Indium Corporation. 

The SMTA will bid a fond farewell to departing board members Martin Anselm, Ph.D., Rochester Institute of Technology; Matt Kelly, P.Eng., MBA, IBM Corporation; and Richard Henrick, Sanmina Corporation. As their time on the Board draws to a close, the SMTA expresses their sincerest gratitude for their continued service and dedication to the association and industry. 

The official transition will occur at the next Board of Directors meeting scheduled for September 22, 2019 at SMTA International in Rosemont, Illinois. 

Share

Print


Suggested Items

SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products

10/14/2019 | Real Time with...SMTAI
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)

07/24/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.



Copyright © 2019 I-Connect007. All rights reserved.