BTU's Fred Dimock to Present at SMTAI Jump Start Session


Reading time ( words)

BTU International, Inc. has announced that Fred Dimock,manager of process technology, will present during SMTA International. Dimock will present “Operation of a Vacuum Reflow Oven with Preliminary Void Reduction Data” during the Jump Start - 101 Technical Session, scheduled to take place Tuesday, Sept. 24, 2019 from 10:30 a.m. - 4:15 p.m. in the Show Floor Theater.

This presentation will provide an overview of the vacuum reflow process and explain the reason vacuum reflow is of interest to the electronic assembly industry. Additionally, Dimock will present a report on preliminary data from a void reduction experiment completed at the Universal Instruments Process Laboratory.

Dimock has taught numerous SMTA solder reflow classes and has participated in the 5-45 subcommittee for the development of IPC-7801 Reflow Oven Process Control Standard. He wrote the chapter on solder reflow for the ‘Handbook of Electronic Assembly’ and ‘A Guide to SMTA Certification’ by Dr. Lasky and Jim Hall.

Dimock holds an Associate’s Degree in Mechanical Design from Wentworth in Boston and a Bachelor’s Degree in Ceramic Engineering from the State University of New York at Alfred (SUNY). He is a long-standing member of the SMTA Technical Committee.

Come meet industry experts and brush up on your technical knowledge. A great primer for students, young professionals, and engineers new to the industry. Six award-winning industry leaders will teach basics and troubleshooting of SMT processes. 

About SMTA:  30 Years Developing Solutions in Electronics Assembly

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.  For more information or to join, please visit www.smta.org.

About BTU International

BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment in the electronics manufacturing market.  BTU’s high-performance reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes. BTU also specializes in precision controlled, high-temperature belt furnaces for a wide range of custom applications, such as brazing, direct bond copper (DBC), diffusion, sintering and advanced solar cell processing. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia and Europe. Information about BTU International is available at www.btu.com.

Share

Print


Suggested Items

SMTA 2019 International Awards

09/30/2019 | Nolan Johnson, I-Connect007
The SMTA International conference—held September 22–29, 2019, at the Stephens Convention Center in Rosemont, Illinois—honored industry members with awards for their contributions to the industry. I-Connect007 has compiled an unofficial list of award recipients. The official list from SMTA will be released shortly, and I-Connect007 will publish it as soon as it is available.

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)

07/24/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.



Copyright © 2019 I-Connect007. All rights reserved.