Viscom Will Present X-ray Inspection of LEDs at SMTA Guadalajara


Reading time ( words)

Viscom Inc. will exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place October 23-24, 2019 at the Expo Guadalajara. The Viscom team will highlight the S3088 ultra chrome and M.Sc.Eng. Alejandro Mariscal-Magaña will present “X-ray Inspection of LEDs.”

Mariscal-Magaña, a well-recognized expert in the field of electronics design and manufactruring, will discuss why to use X-ray inspection for LEDs and its advantages. The presentation also will address process optimization with X-ray inspection.

The S3088 ultra chrome is based on Viscom’s unique 3D AOI technology, and combines accurate defect detection with high inspection speed. This makes the system the first choice for efficient SMT production.

Some of the market-leading features of the S3088 ultra chrome include inspection speed of up to 65 cm2/s and 65 mega pixels of information in each 50 mm x 50 mm field of view. The resolution is switchable, and with 10 µm per pixel even 03015 components can be reliably inspected. Together with the eight angled-view cameras, a virtually shadow-free 3D inspection is one of the key advantages of the system.

About Viscom

Viscom AG develops, manufactures and sells high-quality inspection systems. The portfolio encompasses the complete bandwidth of optical and X-ray inspections. In the area of assembly inspection for electronics manufacturing, the company is among the leading suppliers worldwide. Viscom systems can be configured specific to the customer and can be interlinked. The company headquarters and manufacturing location is in Hanover, Germany. With a wide network of branches, applications centers, service support points and representatives, Viscom is represented internationally. Founded in 1984, since 2006 Viscom has been listed on the Frankfurt Stock Exchange (ISIN: DE0007846867). For additional information: www.viscom.com

 

Share

Print


Suggested Items

Koh Young Europe Celebrates 16,000 Installed Systems

11/25/2019 | I-Connect007 Editorial Team
During productronica 2019, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers. In this video interview, Editor Nolan Johnson and Harald Eppinger, managing director at Koh Young Europe, discuss the company’s milestone of 16,000 installed systems, the Zenith Alpha, and market trends in AOI systems.

Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings

11/20/2019 | Phil Kinner, Electrolube
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.

Discover the Benefits of a Technology Center

10/23/2019 | Barry Matties, I-Connect007
Nico Fahrner, application engineer at Rehm Thermal Systems, talks with Barry Matties about the benefits prospective customers get from being able to fully test their systems in-line at Rehm’s technology centers before purchasing.



Copyright © 2020 I-Connect007. All rights reserved.