AIM to Participate at CTEA Electronics Design & Manufacturing Tech Forum & Expo


Reading time ( words)

AIM Solder will participate in the upcoming Central Texas Electronics Association (CTEA) Electronics Design & Manufacturing Tech Forum & Expo taking place on October 15, 2019 at the Norris Conference Center, Austin, Texas. AIM Solder will highlight its REL electronic solders and its new RX18 and CX18 cored solder wire.

REL22 is an award-winning, high reliability alloy developed to address reliability and production quality issues common to similar multi-element alloys.  Both internal and customer testing has proven that REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61 is ideally suited for industries which require a cost effective alternative to SAC305 with no loss of processing performance or durability.  REL61 provides significant advantages over other no-low silver alloys by offering better flow characteristics at lower temperatures, thus reducing PCB damage and assembly costs.

AIM will also feature its new cored wire solders, RX18 and CX18. The award-winning RX18 is engineered for automated soldering and promotes thermal transfer, fast wetting and reduces voids/skips.  With an operator friendly, low odor/smoke formula, CX18 extends the solder tip life and leaves clear, minimal residues.

To discover all of AIM’s products and services, visit the company at the CTEA Electronics Design & Manufacturing Tech Forum & Expo for more information and to speak with one of AIM’s knowledgeable staff members.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.