GOEPEL Webinar: 100% Inspection of Hidden Solder Joints with AXI Within Line Cycle Time


Reading time ( words)

GOEPEL electronic will be conducting a free webinar, “One X-ray, please. 100% inspection of hidden solder joints with AXI within line cycle time” on Tuesday, October 22 at 2:00 p.m. UTC, 4:00 p.m. CEST, 10:00 a.m. EDT, 9 a.m. CDT.

As a rule, densely populated and complex assemblies always have one thing in common: a large number of hidden solder joints under the housings of the components. These must be inspected to ensure quality. Automatic X-Ray systems (AXI) ensure greater confidence and much higher degree of quality.

The webinar addresses which system concepts are available for testing concealed solder joints (manual vs. automatic testing) and how 100% inspection can be achieved within the line cycle time. Scanning 3D X-Ray image acquisition is presented as the kay to enabling short cycle time with excellent defect detection.

Other Key Features:

  • Comparison of two established 3D image acquisition methods on the market: stop-and-go and scanning X-ray image acquisition
  • Difference between 2D, 2.5D and 3D X-Ray
  • Practical examples of BGA, QFN, and LEDs to demonstrate how double-sided panels can be inspected fully automatically using 3D X-Ray
  • Address the possibilities of defect detection and its limits

In the second part of the webinar, the topic of software will be examined in more detail - from wizard supported test program creation using an offline programming station, to execution of the test program using machine software in Smart Phone style, to verification station for classifying the defects found.

To register, visit GOEPEL electronic’s “One X-ray, please.” event page.

About GOEPEL electronic

GOEPEL electronic is a leading provider of innovative test and inspection solutions for printed circuit board assemblies (PCBAs) and electronic devices and systems. The company is divided into four divisions: Automotive Test Solutions, Embedded JTAG Solutions, Industrial Function Test and Inspection Solutions (AOI·AXI·SPI·IVS). Besides more than 240 employees, who work in the company’s headquarters in Jena/Germany, GOEPEL electronic runs several support and service offices in the UK, USA, India and China. A worldwide distribution ensures the local and on-site support of GOEPEL electronic’s products and solutions.

Share

Print


Suggested Items

The Long Road to a New Standard

09/17/2019 | Barry Matties, I-Connect007
Graham Naisbitt, chairman and CEO of Gen3 Systems, has spent decades leading cleanliness testing standards in a number of different standards organizations like IPC, IEC, and ISO around an assortment of testing methods, such as CAF, SIR, and even introducing a new standard this year for his own testing method—process ionic contamination testing (PICT). Naisbitt breaks down his long involvement with standards and where they stand currently.

The Four Things You Need to Know About Test

07/24/2019 | Neil Sharp, JJS Manufacturing
The electronics manufacturing process can often be extremely complex, and the costs associated with product recalls can be astronomical. A robust approach to test is key to ensuring the quality of your product and the satisfaction of your end user.

Approaches to Overcome Nodules and Scratches on Wire-Bondable Plating on PCBs

07/17/2019 | Young K. Song and Vanja Bukva, Teledyne Dalsa Inc., and Ryan Wong, FTG Circuits
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. This paper details if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful.



Copyright © 2019 I-Connect007. All rights reserved.