ZESTRON Academy to Host FREE “Multiple Thermal Cycles” Webinar


Reading time ( words)

ZESTRON, the global leading provider of high precision cleaning products, services, and training solutions to the electronics manufacturing and semiconductor industries, is pleased to announce that it will host “Multiple Thermal Cycles” on Thursday October 24, from 1:30 p.m. to 2:30 p.m. EDT. This is the final installment of the 2019 ZESTRON Academy Cleaning Webinar Series. Our presenter will be electronics cleaning expert, Jigar Patel, M.S.Ch.E, senior application technology engineer.

Webinar Abstract:

Multiple thermal cycles may be required for a variety of reasons in the production of printed circuit boards. If the PCB includes Surface Mount Technology (SMT) and Through Hole Technology (THT), the board will be processed through both a reflow oven and a wave solder system. With more complex PCB designs that may use stacked components or double-sided circuitry, multiple reflows will be required. This ZESTRON Academy webinar looks at the impact of multiple thermal cycles on the effectiveness of the PCB cleaning process.

About ZESTRON

ZESTRON is headquartered in Manassas, Virginia and operates in more than 35 countries. With eight technical centers worldwide and the industry’s most knowledgeable team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information or to tour one of our technical centers, please visit www.zestron.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.