ZESTRON will be Exhibiting at SMTA Austin and Long Island Expos


Reading time ( words)

ZESTRON will be featuring several cleaning solutions at SMTA Austin and Long Island expos, including products specifically designed to clean under low-standoff components.

ZESTRON cleaning agents are developed to work under some of the lowest clearance components and rinse easily to provide the widest possible process window. Meet with one of our cleaning experts at SMTA Austin expo or SMTA Long Island expo to find out which cleaning agent is best for you.

SMTA Austin will be held at the Norris Conference Center in Austin, TX on October 15. SMTA Long Island will be held at The Melville Marriott Long Island in Melville, NY on October 17. For more information or to register, please visit smta.org.

Share

Print


Suggested Items

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

One Fish, Two Fish, Red Fish, Blue Fish: Same Industry, New Look

05/22/2020 | I-Connect007 Research Team
Learning a lesson from challenges is one thing, but implementing changes based on those lessons is quite another. I-Connect007 regularly surveys leaders in the electronics industry to bring you important and relevant information that helps you make better decisions. What lessons have you learned during the COVID-19 crisis, and what changes have you made?

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.



Copyright © 2020 I-Connect007. All rights reserved.