Indium Corporation to Feature Innovative New Alloy at PCB Carolina


Reading time ( words)

Indium Corporation will feature its new high-performance, high-reliability alloy technology at PCB Carolina on November 13 in Raleigh, North Carolina, USA.

Durafuse™ LT is a novel, low-temperature alloy system designed to provide high-reliability in low applications that are looking for a reflow temperature below 210°C. Where traditional low-temperature solders often produce brittle solder joints that are susceptible to drop shock failures, Durafuse LT offers improved drop shock resilience, outclassing BiSn or BiSnAg alloys, and even performs better than SAC305 with optimum process setup. Durafuse LT:

• Provides a solution for heat-sensitive components and flex polymers
• Prevents thermal warpage of processor components and multilayer boards
• Meets low temperature requirements for step soldering, particularly in RF shield attachment and rework applications

To learn more about Indium Corporation's innovative low-temperature technology, stop by booth #76 or reach out to our Technical Support Engineers at askus@indium.com.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.

Share

Print


Suggested Items

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

BTU Discusses its Next-generation Flux Management System

12/18/2019 | Nolan Johnson, I-Connect007
At productronica 2019, Nolan Johnson spoke with Peter Franklin, managing director of BTU Europe, about BTU’s next-generation solder reflow flux management system—Aqua Scrub. A winner of the show’s Global Technology Award for Soldering, Peter breaks down the specifics of what makes Aqua Scrub such an intriguing technology.



Copyright © 2020 I-Connect007. All rights reserved.