Nordson ASYMTEK Features Conformal Coating and Dispensing Equipment at productronica 2019


Reading time ( words)

Nordson ASYMTEK, a Nordson company (NASDAQ: NDSN), a global leader in dispensing and conformal coating equipment and technologies, introduces more products and solutions to create reliable and efficient conformal coating and dispensing processes in electronics manufacturing at Productronica 2019 in Hall A2, stand 345.

New conformal coating demonstrations and technologies on display:

  • The new Panorama™ S-Line delivers conformal coating process control in a space-saving footprint with overlapping line processes that minimize manufacturing floor space. This innovative, patent-pending line layout, trims 50% from the line's length by using the lower compartment in each piece of equipment for the heated return or flash-off process. This line includes the popular Select Coat® SL-940 coater, an automated coating inspection system and a curing module. An integrated coating thickness sensor allows the user to adjust the coating program speed depending on a thickness trend variation, as well as inter-machine communication (Industry 4.0) to provide real-time Cpk so that coating productivity can be easily monitored.
  • The new Qadence™ flow control system (patent pending) is integrated with the Select Coat® SL-940 conformal coating platform. With an enhanced spray process and flow stabilization, the resulting system delivers closed-loop flow control at new levels of accuracy with highly consistent performance.
  • Other demonstrations include new two-component (2K) and spray conformal coating demonstrations.

New automated fluid dispensing demonstrations and technologies on display:

  • Two Helios® SD-960 dispensers demonstrate two-component (2K) and large-volume dispensing with process controls that protect the accuracy demanded by electronics manufacturers. A space-saving, integrated plasma pre-treatment is also displayed for more efficiency and productivity during large-volume dispensing.
  • The new precision dispenser, Forte™ Series, includes a dual-simultaneous dispense head with two high-frequency IntelliJet® Jetting Systems that dispense at the same time to further boost UPH and quality outcomes - reducing dispense time by 50% and automatically adjusting for workpiece and individual component rotational skew.
  • The Vantage® Series dispensing system, introduced at Productronica 2017, now features a dual-head for even more speed with precision.
  • The popular Spectrum® II dispenser is integrated with a new type of progressive cavity pump to enhance small-volume dispensing. This platform also includes a post-dispense inspection kit that provides process control for consistently jetting small volumes as low as 1 nanoliter at frequencies up to 1000 Hz.
  • A new family of progressive cavity pumps will be introduced, offering precision dispensing performance for a range of fluid volumes from large to micro-levels. One pump model is ideal for dispensing narrow lines of two-component fluids in low flowrates.

See these products and more at Productronica 2019, the world's leading trade fair for electronics development and production, in Munich, Germany, November 12-15, 2019, in the Nordson stand A2.345.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Drying Boards after Rework Cleaning—To Do or Not to Do?

09/19/2017 | Bob Wettermann, BEST Inc.
In cases where water soluble fluxes are being used in the rework process, in cases where the components need to have flux residues washed off, or in cases where the board needs to be cleaned with water for subsequent conformal coating touchup, proper drying and perhaps even bake out procedures need to be performed.

2015’s Most Read SMT Articles

12/31/2015 | I-Connect007
Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year. Check them out.



Copyright © 2020 I-Connect007. All rights reserved.