Words of Advice: The OEM Systems Designer


Reading time ( words)

In a recent survey, we asked the following question: What advice would you give an OEM systems designer? Here are a few of the answers, edited slightly for clarity.

  1. Solidify the design, and don’t push for too many changes unless you want to start from scratch.
  2. Simulate the power.
  3. Always have good margins on designs in comparison to the manufacturer’s capabilities.
  4. State very clearly all of the parts and components.
  5. Get a good IPC footprint design program.

Share

Print


Suggested Items

Just Ask Happy: Calculating Trace Temps in a Vacuum

07/07/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

Just Ask Happy: Stacked Microvia Reliability Issues

07/01/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

Book Excerpt: Producing the Perfect Data Package, Part 2

06/18/2020 | I-Connect007 Editorial Team
The following is an excerpt from Chapter 2 of Mark Thompson's I-Connect007 eBook The Printed Circuit Designer’s Guide to... Producing the Perfect Data Package. Mark is in engineering support at Prototron Circuits and a Design007 Magazine columnist.



Copyright © 2020 I-Connect007. All rights reserved.