Specialty Coating Systems to Exhibit at Compamed in Düsseldorf


Reading time ( words)

Specialty Coating Systems will exhibit in Hall 8 Stand F19.1 at Compamed, November 18-21, 2019 in Düsseldorf. SCS will exhibit biocompatible Parylene conformal coatings for the medical device industry.

For more than 45 years, a vast array of medical devices and components have been protected by Parylene coatings, including pacemakers, stents, catheters, neurostimulation devices, electrosurgical tools, ocular and cochlear implants, needles, pharmaceutical containers and elastomeric components, to name a few.

SCS is a leader in Parylene coating services and technologies with coating facilities throughout the Americas, Europe and Asia. To learn more about SCS or to schedule a meeting at the show, please contact SCS at +1.317.244.1200 or visit www.scscoatings.com.

About Specialty Coating Systems

Headquartered in Indianapolis, Indiana, Specialty Coating Systems is the worldwide leader in Parylene conformal coating services and technologies. As the direct descendant of the companies that originally developed Parylene, SCS has over 45 years of experience and expertise that it leverages for its customers through coating facilities throughout the Americas, Europe and Asia. The company also offers industry-leading liquid coating systems including spray, spin and dip coating systems and ionic contamination test systems. For more information on SCS, please visit www.scscoatings.com.

Share

Print


Suggested Items

Practical Verification of Void Reduction Method for BTC Using Exposed Via-in-pad

12/16/2019 | Alfredo Garcia, et al, Sanmina and Nokia
The method explored in this article regards the use of exposed via-in-pad. A dedicated test vehicle was designed for two types of QFN components. The main variables accounted for were the component size, number of exposed vias in the thermal pad, via pitch, via size, and solder paste coverage. The responses sought in this experiment include a thermal pad void level and solder wicking down the via barrel with resulting solder protrusion on the opposite side of the PCB.

Dispensing EMI Shielding Materials: An Alternative to Sputtering

08/23/2019 | Garrett Wong, Nordson Asymtek and Jinu Choi, Henkel Electronic Materials Llc
Shielding electronic systems against EMI has become a hot topic. Technological advancements toward 5G standards, wireless charging of mobile electronics, in-package antenna integration, and SiP adoption are driving the need to apply more effective EMI shielding and isolation to component packages and larger modules. For conformal shielding, EMI shielding materials for exterior package surfaces have mostly been applied with a PVD process of sputtering, leveraging front-end packaging technologies to back-end packaging applications.

The Role of Parylene Conformal Coatings in Next-gen Electronics

08/19/2019 | Tim Seifert, Specialty Coating Systems
Designers and manufacturers of electronics are under pressure to make packages smaller, lighter, and more environmentally friendly, while ensuring that their new technologies perform reliably in their operating environments. This article takes a closer look at Parylene conformal coatings and the role they can play in helping manufacturers address current and future challenges in the electronics industry.



Copyright © 2020 I-Connect007. All rights reserved.