Indium to Feature InFORMS Reinforced Solder Preforms for IGBT Assembly at NEPCON Japan


Reading time ( words)

Indium Corporation will feature its reinforced solder alloy fabrications, InFORMS®, for IGBT assembly at NEPCON Japan, January 15-17, Tokyo, Japan.

Uneven solder bondline thickness between the substrate and baseplate of an IGBT module can create areas of increased stress, leading to delamination and premature failure during the operational life of the module. Indium Corporation’s InFORMS® are a specially designed composite solder preform with a reinforcing matrix designed for all-around reliability. This results in:

  • Improved mechanical and thermal reliability
  • Uniform bondline thickness
  • Low-voiding performance

InFORMS® provide engineers with an enhanced material for the development of more reliable and higher performance modules. Due to the planarity improvements and stand-off tolerances, the package design becomes more predictable. In addition, stronger and more dependable joints allow for high power densities.

For more information about InFORMS®, visit www.indium.com/informs or visit us at booth #ISP2-0407.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.

Share

Print


Suggested Items

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

BTU Discusses its Next-generation Flux Management System

12/18/2019 | Nolan Johnson, I-Connect007
At productronica 2019, Nolan Johnson spoke with Peter Franklin, managing director of BTU Europe, about BTU’s next-generation solder reflow flux management system—Aqua Scrub. A winner of the show’s Global Technology Award for Soldering, Peter breaks down the specifics of what makes Aqua Scrub such an intriguing technology.



Copyright © 2020 I-Connect007. All rights reserved.