Indium Corporation to Feature Innovative New Alloy at IPC APEX Expo 2020


Reading time ( words)

Indium Corporation will feature its new high-performance, high-reliability alloy technology at IPC APEX Expo, February 4-6, in San Diego, Calif., USA.

Durafuse LT is a novel, low-temperature alloy system designed to provide high-reliability in low-temperature applications with reflow below 210°C. Where traditional low-temperature solders can produce brittle solder joints that are susceptible to drop shock failures, Durafuse LT offers improved drop shock resilience, outclassing BiSn or BiSnAg alloys, and performs better than SAC305 with optimum process setup. Durafuse LT:

  • Provides a solution for heat-sensitive components and flex polymers
  • Prevents thermal warpage of processor components and multilayer boards
  • Meets low-temperature requirements for step soldering, particularly in RF shield attachment and rework applications.

To learn more about Indium Corporation’s innovative low-temperature technology, stop by the company’s booth at APEX (#1037), or reach out to our Technical Support Engineers at askus@indium.com. 

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.