High-Power UV-LED Systems for 3D Printing, Maskless Photolithography

Reading time ( words)

Innovations in Optics offers total solutions that pair high-power UV-LED Illuminators with precision driver/controllers for digital light processing (DLP) applications in 3D printing and maskless photolithography.  The UV-LED technology offers more reliable and economical advantages over lasers and arc lamps in UV DLP systems.  Optical power from these UV-LED systems can exceed 35 Watts of incident flux onto the active area of the DLP.

The Model 3300 series of UV-LED Illuminators for DLP comprise a densely packed UV-LED array. The illuminators are optimized to support the larger of TI’s chipset families, DLP7000, DLP9000, and DLP9500.  Standard LED center wavelengths range from 365 nm to 435 nm.  Single or multi-wavelength configurations are possible.  Up to 18-die integrated into the UV-LED array of the 3300 series illuminators can be driven and modulated independently. Recirculated liquid-cooling allows the UV-LED array to be operated at a very high current density. The result is an extremely high power, highly uniform UV-LED illuminator providing unprecedented speed and resolution for UV DLP applications.

Specific models for 3D-Printing in the 3300 series of illuminators feature optical correction of keystone distortion which preserves pixel resolution, reduces stray light and improves image contrast. Models used for maskless photolithography to manufacture printed circuit boards feature multi-wavelength LED arrays to support many photoresists ranging from general purpose dry film to conventional soldermask. A controllable combination of different light wavelengths optimizes the spectral balance of the exposure for all types of UV processed materials. 

The 5500 series of digital driver/controllers is specially designed to ensure maximum output and lifetime from Innovations in Optics’ 3300 series UV-LED illuminators. The driver/controllers provide precise, independent, constant current of up to 3A per die to achieve optimal performance. Independent current control to each UV-LED die achieves optimal performance and lifetime by ensuring uniform current density throughout the entire LED array. The 5500 system additionally includes the ability to monitor a temperature sensor that is installed in all illuminators, and a photosensor input for monitoring light output from specific illuminator designs.

 

12/07/2021 | Pete Starkey, I-Connect007

Faced with the choice between a real or virtual event, Bill Wilkie took a calculated risk. It has been many long months since members of the Institute of Circuit Technology had gathered together under one roof, but a fair-sized bunch of industry stalwarts braved the weather and the threat of COVID, descended on the Manor Hotel in Meriden, UK, on Nov. 30, and applauded Bill’s decision to go live. They were not disappointed; the program was superb, the atmosphere upbeat, and the networking opportunity priceless.

10/12/2020 | Pete Starkey, I-Connect007

“We’re not out of trouble yet, but it’s a whole lot better than a couple of months ago.” Walt Custer’s business outlook update, with emphasis on the European electronics industry, attracted a capacity audience to EIPC’s webinar on October 2. Pete Starkey details how it wasn’t all bad news.

03/11/2020 | Pete Starkey, I-Connect007

Back to Meriden, the nominal centre of England where the daffodils were blooming. A good crowd made it to the spring seminar that followed the Annual General Meeting of the Institute of Circuit Technology (ICT), with five specialist presentations and excellent opportunities to network with their peers in the industry. Pete Starkey shares his overview of the event.