Indium Discusses New Materials and Plans for 2020


Reading time ( words)

During productronica 2019, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview, part of the productronica coverage, the I-Connect007 team speaks with Product Manager Chris Nash and Senior Product Manager Andy Mackie, both with Indium Corporation.

Editor Nolan Johnson sits down with Nash and Mackie to discuss Indium’s focus on creating innovative products for the 5G, automotive, semiconductor, and high-reliability segments.

Indium_Andy_Mackie-200.jpgMackie offers a preview of Indium’s plans for 2020 and beyond, including lead-free drop-in sintering materials that can be dispensed and printed more quickly than ever before. As Mackie says, “Material science changes the world.”

The productronica event is one of the world’s leading trade fairs for electronics development and production. The productronica trade fair is held on alternating years, at the Messe München in Munich, Germany. The next productronica will be held November 16-19, 2021.

Watch video below:

Share

Print


Suggested Items

Super Dry: Increasing Component Storage Needs

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Super Dry’s Richard Heimsch about how the need for dry storage solutions has increased throughout the pandemic, including further demands for traceability and automation capabilities.

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2021 I-Connect007. All rights reserved.