AIM to Participate at IPC APEX EXPO 2020


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce their upcoming attendance at IPC APEX EXPO 2020 taking place February 4-6, 2020 at the San Diego Convention Center in San Diego, California. AIM will highlight their NC273LT low temperature solder paste for bismuth bearing alloys, RX18 and CX18 no clean flux cored solder wire along with their full line of solder assembly materials.

AIM's NC273LT low temperature solder paste provides assemblers another tool to meet the changing needs of an evolving PCB assembly market. With peak reflow temperatures below 170°C, NC273LT reduces component and substrate warpage, reduces thermal exposure and saves energy. NC273LT paste improves the wetting performance of bismuth alloys to RoHS compliant plating and surface finishes. NC273LT provides long stencil life, excellent transfer efficiencies and minimizes solder balling common to high bismuth alloys. When thermal exposure during the assembly process is a limitation, NC273LT is an excellent RoHS compliant replacement.

AIM's RX18 and CX18 continue to achieve unprecedented customer acceptance. Engineered for automated/robotic selective soldering, RX18 promotes thermal transfer, fast wetting and reduces voids/skips. Additionally, RX18 is extends solder iron tip life and leaves minimal flux residue. CX18 is an operator friendly, low odor/smoke formula, and speeds soldering performance leaving a clear, electrically safe residue that does not require removal. Further throughput and reliability gains can be realized when CX18 and RX18 are combined with AIM's REL61™ and REL22™ alloys. REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61 is ideally suited for industries which require a cost effective alternative to SAC305 with no loss of processing performance or durability. 

Along with these products, AIM will also showcase its full line of advanced solder materials, including solder paste, liquid flux and solder alloys. Visit AIM at IPC APEX EXPO 2020 in Booth # 2447 at the San Diego Convention Center, San Diego, CA for more information and to speak with one of AIM’s knowledgeable staff members.

Share

Print


Suggested Items

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

BTU Discusses its Next-generation Flux Management System

12/18/2019 | Nolan Johnson, I-Connect007
At productronica 2019, Nolan Johnson spoke with Peter Franklin, managing director of BTU Europe, about BTU’s next-generation solder reflow flux management system—Aqua Scrub. A winner of the show’s Global Technology Award for Soldering, Peter breaks down the specifics of what makes Aqua Scrub such an intriguing technology.



Copyright © 2020 I-Connect007. All rights reserved.