KYZEN to Launch the New Solution for Cleaning Stencils at IPC APEX EXPO


Reading time ( words)

KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, is pleased to announce that it will introduce a brand new, next-generation stencil cleaner at the 2020 IPC APEX EXPO, scheduled to take place Feb. 4-6, 2020 at the San Diego Convention Center in California. KYZEN® E5631 will be introduced for the first time in Booth #1637.

KYZEN E5631 is a cost-effective solution formulated to clean flux and uncured adhesives from stencils and misprints. Designed to be a total stencil cleaning solution, E5631 is diluted and used in all stencil cleaning processes including spray-in-air and ultrasonic processes as well as in the printer as an under-stencil wipe solution.

E5631 provides superior and exceptional cleaning of ALL widely used assembly materials. It rinses easily and completely thus reducing typical dry time. Additionally, E5631 was formulated to operate at low concentrations.

For more information about KYZEN, or to ask specific technical cleaning questions, visit www.kyzen.com.

About KYZEN

KYZEN is a global leader in providing environmentally responsible, RoHS compliant precision cleaning chemistries for industries ranging from electronics and advanced packaging to metal finishing and aerospace applications. Since its founding in 1990, KYZEN’s innovative cleaning technologies, scientific expertise and customer support have been repeatedly recognized with the industry’s most prestigious awards. For more information, visit www.kyzen.com.

Share

Print


Suggested Items

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Reliability Testing in Automotive and Digital Factories

12/11/2019 | Barry Matties, I-Connect007
Barry Matties spoke with Gen3’s Andrew Naisbitt about what readers should know about SIR and CAF testing, what to consider if you’re thinking of bringing it in-house, and how reliability testing fits into automotive and the digital factory.

André Bodegom on European Challenges, Automation, and Automotive

12/02/2019 | Pete Starkey, I-Connect007
Editor Pete Starkey speaks with André Bodegom, managing director for Adeon Technologies in the Netherlands, about changes he has seen over the years in major industry sectors, challenges in the European market, and other areas of growth.



Copyright © 2020 I-Connect007. All rights reserved.