CFX Preview at IPC APEX EXPO 2020


Reading time ( words)

The I-Connect007 Editorial Team chats with IPC’s Chris Jorgensen about the advances CFX has made in the past year and where the standard is in the standardization process. Chris also previews the CFX line that will be on display at the upcoming IPC APEX EXPO and shares IPC’s plans on educating and providing support solutions to potential users of CFX to implement it more easily.

Dan Feinberg: Chris, I knew absolutely nothing about CFX until about 18 months ago. I became involved in it by listening to some talks at IPC APEX EXPO 2018, and I was fascinated by it. And last year’s exhibit was quite good; I went upstairs to the demo room and had a chance to look at it. What CFX progress are we going to see at IPC APEX EXPO 2020 this year?

Chris Jorgensen: At last year’s IPC APEX EXPO, the IPC-2591 standard was not even published yet. Since that time, the subcommittee approved the first edition in spring and has put the standard on a twice-yearly version update schedule to support CFX for additional equipment or other needs communicated by the industry. The subcommittee chose to have the standard follow a version approach rather than the typical revision letters or amendments of other IPC standards because this is what IT professionals or software solutions providers understand. Once the subcommittee approved IPC-2591, version 1.0, they began work on version 1.1, which is currently under ballot. We expect to have that published in time for IPC APEX EXPO 2020.

Aside from the standard, we have also continued to bring real-world views of CFX to the industry through virtual demonstrations and live factory lines at trade shows in the U.S., Europe, and China. These demonstrations enable the industry to see the power and simplicity of CFX in mixed-vendor factory lines, as well as how CFX can enable Industry 4.0.

To read this entire interview, which appeared in the January 2020 issue of SMT007 Magazine, click here.

 

Share

Print


Suggested Items

Congratulations to Steve Pudles! IPC Hall of Fame 2020 Inductee

02/20/2020 | Patty Goldman, I-Connect007
With over 32 years spent working with IPC, Steve Pudles was elected to the IPC’s Hall of Fame this year. Patty Goldman spoke with Steve about how he first became involved as well as his time in the organization, including his work with the EMS Management Council.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.

True or False: CFX Edition

02/06/2020 | David Bergman, vice president, Standards and Training, IPC
Since the release of IPC-2591—Connected Factory Exchange (CFX), Version 1.0—there has been a lot of buzz regarding CFX within the industry from all segments. Still, with all of the buzz, there are also some misconceptions floating around the industry regarding CFX. David Bergman takes some of those statements, using feedback from Subcommittee members, and plays a little game of “True or False: CFX Edition.”



Copyright © 2020 I-Connect007. All rights reserved.