Techcon to Demo New Jet Valve Dispensing System at IPC APEX EXPO


Reading time ( words)

Techcon, a leader in precision fluid dispensing technologies, plans to exhibit in Booth #2247 at the 2020 IPC APEX EXPO, scheduled to take place Feb. 4-6, 2020 at the San Diego Convention Center in California. The company will showcase its new TS9800 Series Jet Valve Dispensing System in the Metcal booth.

The TS9800 Series Jet Valve Dispensing System includes the TS9800 Piezo-actuated jet valve and TS980 Smart Controller.  Unlike pneumatic jet valves and other contact dispensing solutions, the TS9800 Jet Valve utilizes Piezo, non-contact jetting technology for increased speed and reduced scrap during the dispensing process. 

The Techcon TS9800 Jet Valve provides ultra-fast dispensing speeds and the capability to dispense dots and lines as small as 0.5nL at up to 1500 Hz continuous and 2000 Hz max bursts for higher throughput on a wide range of fluid types and viscosities.

To learn more about Techcon, visit www.techcon.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.