LPKF Introduces New Depaneling Laser Systems at IPC APEX EXPO 2020

Reading time ( words)

LPKF Laser & Electronics is introducing the LPKF CuttingMaster family of laser depaneling systems for rigid and flex PCBs at IPC APEX EXPO. Available with different laser sources, power levels and two different working areas, the CuttingMaster 2000 and CuttingMaster 3000 systems are suited to achieve the highest quality results for nearly every depaneling task. LPKF’s proprietary CleanCut Technology allows for even the most demanding applications which require absolute cleanliness of the cutting edges to be processed with lasers.

The CuttingMaster 2000 series is a highly cost-effective laser depaneling system. Its very compact footprint saves valuable space on the production floor while it still provides an effective working area to handle panels up to 350 mm x 350 mm (13.8” x 13.8”). It is available either as a stand-alone system or as an in-line configuration with integrated conveyor system. The high-throughput and clean cutting quality is comparable to mechanical depaneling methods, but with none of the dust or debris, while the low investment cost allows for a very attractive ROI.

The CuttingMaster 3000 series provides a larger working area to handle panels up to 500 mm x 350 mm (19.7” x 13.8”) and high speed and high precision linear motor drive system with a rigid granite construction that provides exceptional positioning accuracy for high-end-applications. The CuttingMaster 3000 is also available in a stand-alone configuration or in-line integration for SMT lines. The ability to integrate a wide range of different laser sources with different wave lengths and pulse durations in both the nanosecond and picosecond range allows these systems to be deployed for a wide range applications and materials, including drilling applications.

The systems come with powerful LPKF CircuitPro system software, which is perfectly matched to the hardware and designed for easy-to-use operation without expert knowledge. CircuitPro is compatible with all standard data formats and standard interfaces used in PCB production. Custom MES connectivity, multi-fiducial detection, bad-board recognition and full product traceability are also available to optimize the production efficiency of the LPKF CuttingMaster system in the SMT assembly process. All LPKF CuttingMaster systems are available as a stand-alone or inline solution. (Fig. 2) They are prepared for 24/7 production. In addition to these systems, LPKF will also be demonstrating its laser plastic welding systems and rapid PCB prototyping technology at the show. For more information on LPKF’s latest laser-based solutions, visit LPKF in booth 3653 at the 2020 IPC APEX EXPO or visit www.lpkfusa.com.

Why considering Laser Depaneling at all?

Laser depaneling has numerous advantages compared to conventional depaneling processes: The contactless processing is a completely stress-free method for the workpiece. As the surrounding material is not affected, cutting edges can be made directly next to components, which increases the usable space on the circuit board and saves material, especially in the case of full cuts. Laser depaneling also avoids any airborne dust and debris contamination of the work piece, which completely eliminates any post-processing or cleaning, and improves both production yield and long-term product reliability. LPKF’s CleanCut technology mitigates carbonization and produces clean, sealed sidewalls without any chipping or frayed glass fibers that are often seen with mechanical depaneling methods.

The laser produces very narrow cutting channels with very high precision and no limitation to the shape or design of the cut. It can process a wide variety of flexible and rigid materials. The laser-beam-guided process requires no tooling and does not wear, which can result in considerable savings in consumable expenses.

LPKF laser depaneling systems are designed and built for 24/7 production and are perfectly suited to sensitive applications in a wide variety of industries such as medical technology, automotive, and consumer electronics.

About LPKF

Established in 1976, LPKF Laser & Electronics manufactures cutting, welding and prototyping systems used in circuit board and microelectronics fabrication, medical technology, and the automotive sector. LPKF’s worldwide headquarters is located in Hannover, Germany and its North American headquarters resides near Portland, OR.


Suggested Items

The Benefits of Vapor Phase Reflow Soldering

05/03/2023 | Barry Matties, I-Connect007
JB Byers, vice president of technical support services at A-Tek Systems in Longmont, Colorado, recently gave a presentation on vapor phase reflow soldering at the SMTA Boise Expo & Tech Forum. After his presentation, I-Connect007 briefly talked with him about how the process can help reduce voids and lower operating cost.

Coming Clean with KYZEN

04/07/2023 | Andy Shaughnessy, I-Connect007
At the recent SMTA Dallas Expo & Tech Forum, I spoke with Fernando Rueda, manager of the Americas for KYZEN, about the company’s newest technologies and trends he’s seeing in SMT cleaning processes. As Fernando points out, cleaning is now a requirement for most boards, and the cleaning process becomes more challenging as features get smaller and faster. No-clean technology can often make a challenging situation worse.

A Week-long Industry Extravaganza

03/03/2023 | Happy Holden, I-Connect007
We were back in San Diego, maybe for a “long vacation,” as IPC APEX EXPO is in Anaheim next year. Before we get to Anaheim, though, let’s talk about the show: It was a great week. I spent Sunday and Monday visiting some excellent Professional Development courses. As you know, this is a fast-changing industry, and we have to keep learning to stay ahead. On Monday, I attended the Microvia Weak Interface/Reliability subcommittee, and on Tuesday, the Ultra-HDI Technology Committee.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.