True or False: CFX Edition


Reading time ( words)

Early in 2019, IPC published IPC-2591— Connected Factory Exchange (CFX), Version 1.0. This standard was developed by the IPC Connected Factory Initiative Subcommittee over a two-year period to address issues with machine-to-machine communication and provide the electronics manufacturing industry with a true plug-and-play system for any company to achieve Industry 4.0.

Since the release of the standard, there has been a lot of buzz regarding CFX within the industry from all segments, including EMS companies, equipment manufacturers, and software solution providers. The Subcommittee has grown to 275 members, with an additional 63 members on the 2-17-CN Connected Factory Initiative Subcommittee in China, and 94 companies have declared their support on the CFX website. Additionally, 24 companies have shared their CFX implementation roadmaps on the CFX website, with more roadmaps coming in on a regular basis. You can view the supporters, roadmaps, and a library of helpful CFX resources at ipc-cfx.org.

Still, with all of the buzz, there are also some misconceptions floating around the industry regarding CFX, how it is used, the need for middleware, and how it stacks up against other standards for Industry 4.0. Thus, I thought it would be fun to take some of those statements, using feedback from Subcommittee members, and play a little game of “True or False: CFX Edition.”

To read this entire article, which appeared in the January 2020 issue of SMT007 Magazine, click here.

 

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.