Dow Introduces First Solventless Silicone Conformal Coating


Reading time ( words)

Dow (NYSE: Dow) introduced today at IPC APEX EXPO 2020 new DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating, the industry’s first solventless silicone conformal coating with an ultraviolet (UV) and moisture dual cure system for high throughputs. This new environmentally responsible silicone technology promotes sustainability, health and safety while reducing processing costs through automated spraying and fast, energy-efficient UV curing. Other silicones support UV curing, but none are conformal coatings with a low enough viscosity for spray coating and with a secondary moisture cure for shadowed areas. The new DOWSIL™ product also offers more reliable protection against stress and thermal cycling versus competitive materials.

Brian J. Chislea, senior electronics application engineer at Dow, will discuss the new DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating during two poster sessions at IPC APEX EXPO. The first session is scheduled for today, Tuesday, Feb. 4, from 10:00 to 10:30 a.m. Pacific Standard Time (PST). The second is scheduled for Wednesday, Feb. 5, from 4:30 to 5:00 p.m. PST.

“Dow has long been an innovative leader and developer of leading-edge conformal coating technologies that address our customers’ most pressing needs,” said Chislea. “DOWSIL™ CC-8030 Coating is an excellent example of this. “By listening closely to our customers, we responded with this first-of-its-kind material that can help electronics manufacturers meet their sustainability and productivity goals, and more.”

DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating is an environmentally progressive solution for protecting rigid printed circuit boards (PCBs), sensitive electronic components and fine-pitch designs from environments with airborne contaminants. This high-performance silicone conformal coating is formulated without benzene, toluene, ethylbenzene or xylene (BTEX) solvents. The new DOWSIL™ Conformal Coating also has a low modulus for delicate components and high elongation for reliable protection against stress. To provide an even greater level of PCB protection, DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating can be applied in multiple layers. Compared to leading acrylated urethane UV cure coatings, the new silicone-based Dow technology provides superior protection against thermal cycling.

A soft, medium-viscosity silicone, DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating has a rheology that is designed for high-throughput spray coating. Its dual cure technology combines speed with completeness of coverage for reduced work-in-process inventory. With UV curing from a standard mercury broad spectrum lamp at 300 mW/cm^2, the DOWSIL™ coating is tack-free after less than 10 seconds. Compared to thermal ovens that cure in minutes, UV ovens are also smaller and consume less energy. Further, the new coating’s secondary alkoxy moisture curing reaches any shadowed areas where UV light can’t penetrate, or UV curing is otherwise incomplete. Moisture curing also supports thicker coating and won’t add stress from thermal cycling.

DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating is available globally.

Share




Suggested Items

Printed Circuit Boards: Past the Lobby and Onto the Floor

08/08/2022 | I-Connect007 Editorial Team
There has not been a time in recent memory when the U.S. legislative body is putting as much focus on the microelectronics industries. One bill, the CHIPS Act, was signed into law last year. A new bill introduced this year seeks to allocate funding for printed circuit board fabrication. In this exclusive interview, our team spoke with Travis Kelly, CEO of Isola Group and president of the Printed Circuit Board Association, and U.S. Rep. Blake Moore (R-Utah), who has co-sponsored the bill now before the House. Travis and Blake both express optimism about onshoring domestic production, but the realities of the legislative calendar may pose some risks.

How Important Is Trust?

07/20/2022 | Randy Cherry, IPC
If you work for a U.S. defense prime contractor, do you have concerns that the controlled unclassified information (CUI) for your printed circuit boards, your printed circuit board assemblies, and your cable and wire harnesses is safe? What about the design and the development process for your products? Is the controlled technical information (CTI) safe and protected? Are the suppliers that your company selected maintaining a quality system, a supply chain risk management process, a security system to protect products and services from unauthorized access, and a Chain of Custody policy for electronic and physical materials?

IPC Mexico Continues to Grow

07/20/2022 | Barry Matties and Andy Shaughnessy, I-Connect007
IPC Mexico has been growing for the past few years, and it’s no wonder: Mexico has become a major hub in the world of PCB manufacturing, spurred in part by reshoring as companies pulled work back from China during the pandemic. As the country’s maquiladoras thrived, IPC began expanding the Mexican educational and training operations, and the group recently named Lorena Villanueva as director of IPC Mexico. Andy Shaughnessy and Barry Matties recently spoke with Lorena and IPC Vice President of Education David Hernandez about IPC Mexico’s growth, as well as the office’s plans to provide PCB manufacturers the training resources they need to succeed.



Copyright © 2022 I-Connect007. All rights reserved.