Creative Materials Introduces 128-17A/B Fast Curing Electrically Conductive Adhesive


Reading time ( words)

Creative Materials introduces 128-17A/B fast curing electrically conductive adhesive. This product is a two-component silver filled adhesive that cures at room temperature. The working life after mixing the components is 5 minutes at 25°C and the product can be handled in 30 minutes. Typical end uses include electrical and mechanical attachments on electrical components and devices. A key feature is a very fast set-up time which allows for rapid processing and repair in a variety of applications. 128-17A/B has thermal stability up 180°C and tensile strength >400 psi.

Creative Materials designs, develops, and custom manufactures specialty electronic inks and adhesives. The company holds both ISO9001 and ISO14001 certifications. All products are manufactured in the USA.

Please contact us at 1-800-560-5667 to speak with one of our application specialists or email us at info@creativematerials.com

Share

Print


Suggested Items

Northrop Grumman: 3D Nanomaterials May Counter Gaps in Additive Supply Chain

10/22/2020 | Andy Shaughnessy, Design007 Magazine
The best technology is dead in the water if your domestic supply chain won’t support it. That was just one of the takeaways from Dr. Judy Dickson’s talk during the SMTA Additive Electronics TechXchange. In her presentation, titled “Advanced PWBs: A Collaboration Between Design, Operations, and the Supply Chain,” Dickson, a senior principal systems engineer at Northrop Grumman Mission Systems, laid out the many challenges her department faces in fielding HDI advanced packaging into the next decade. Most of these challenges are related to sourcing the necessary materials in the U.S.

Increase Traceability, Prevent Counterfeiting

08/25/2020 | I-Connect007 Editorial Team
Michael Ford, senior director of emerging industry strategy for Aegis Software and I-Connect007 columnist, speaks about the increasing importance of traceability in manufacturing and throughout the supply chain, including how it affects such areas as counterfeit components and inventory management.

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.



Copyright © 2021 I-Connect007. All rights reserved.